Home insulation in Fort Worth TX - an upstairs that feels like downstairs
Hot upstairs, drafty rooms or a power bill that keeps climbing? We find the leaks first, then insulate so the house holds its temperature.
- Services
- 16
- Service areas
- 12
Book a look at your attic
Point out any drafty room or cold floor and we'll check it while we're there.
Request an estimateWhat does home insulation in Fort Worth involve?
Home insulation in Fort Worth means adding insulation to your attic, floors and crawl space and sealing the air leaks around the house, so your rooms stay closer to the temperature you set and the AC doesn't run as hard to get there.
Most calls start with a hot upstairs, a drafty room over the garage, cold floors or a power bill that keeps climbing. Usually the attic is a big part of it, so attic insulation is where most jobs begin. The price moves with how much space we're covering, how many inches are already up there, what has to be fixed or pulled out first and which material suits your house. The schedule turns mostly on that prep, because a roof leak or old wiring has to be handled before anything new goes in. Your own figure comes from seeing your attic in person. Apex Fort Worth Spray Foam Insulation is based in Fort Worth, and we work in many of the cities around it.
How we handle home insulation, start to finish
I start in the attic, looking for roof leaks, moisture, pest damage and anything structural, and before I quote you get a list of what needs repair, so you know what's part of our price and what isn't. If a roof leak needs fixing, I'll tell you to get that done first rather than sell you insulation that won't help. I also tell you up front whether your old insulation stays, gets moved aside or comes out. Then our crew does the air sealing, closing the gaps around can lights, pipes, wires and the hatch, because insulation laid over a draft spends its life fighting it. We keep the eave vents clear so the attic can still breathe, and we lay the new material full depth all the way out to the edges, not piled up in the middle where it's easy to reach. On material, sealing the gaps and topping up with blown-in loose fill usually gives you the most for your money. Spray foam costs more but seals air while it insulates, and it usually earns that cost when your ductwork runs through the attic.
When the old layer is soaked, full of droppings or just in the way, insulation removal comes first, because fresh material over a bad layer keeps the problem in your house. If the cold floors start under the house, crawl space insulation is often the part of the job that actually fixes them.
Home insulation in Fort Worth and what the city expects
The City of Fort Worth uses the International Energy Conservation Code as its energy code, with some local changes, so I don't assume what a job needs. Before work starts, we check with the city's building office about your job and take care of any permit and inspection on our end.
Around Fort Worth we see two kinds of attics over and over. Older houses often have a thin, packed-down layer that's been up there a long time, sometimes with old wiring or roof leaks that have to come first. Newer houses tend to have the ductwork and the air handler sitting up in the attic heat, with gaps around them that nobody sealed. We meet the same mix on jobs in Haltom City and North Richland Hills, and we check for it the same way before any insulation goes in.
Why call us for home insulation
I quote the job myself
I come out to look at your attic and give the estimate in person, and then I run the work alongside our install crew. The person who found the problem is the one there making sure it gets fixed in the right order.
Insulating homes since 2020
I spent years at an office desk before I learned insulation on a Fort Worth crew, and I started this business in 2020. Six years on, I still explain what I find in plain words, so you understand your house a little better when we leave.
Fully licensed and insured
We're fully licensed and insured. That matters in an attic, where our crew works around your wiring, framing and ductwork.
Satisfaction guaranteed on every job
Satisfaction guaranteed on every job is our promise, and we keep it by doing the prep before the insulation. A job done in the right order is the one you end up happy with.
- Phone
- (817) 349-3679
- Hours
- Mon–Fri: 8 AM–11 PM, Sat–Sun: 6 AM–10 PM
- Location
- Fort Worth, TX 76102
What matters most is the order the work goes in, so call (817) 349-3679 or send us a request with your home's age, where the attic access is and any signs of leaks or old wiring.
Get a home insulation estimate with your repair list
We reply within one business day to set up a visit. The estimate is free, done on site and comes with no obligation. I come out myself, look at the attic and the rest of the house, and then give you the price.
- Phone
- (817) 349-3679
- Location
- Fort Worth, TX 76102
- Hours
- Mon–Fri: 8 AM–11 PM, Sat–Sun: 6 AM–10 PM
- Credentials
- Fully licensed and insured.
Frequently asked questions
How much does home insulation cost in Fort Worth?
Attic insulation in the Dallas area usually costs about $1,400 to $4,800 per job, and that's the going rate in the market, not a quote from us. Where your house lands depends on the attic's size, how much is already up there, what has to be repaired or removed first and the material you pick. You may also qualify for help paying for air sealing and insulation through the state's Weatherization Assistance Program.
Is blown-in insulation or batts better for my attic?
Blown-in usually comes out ahead, since older Department of Energy guidance says loose fill blown into the attic, whether fiberglass, rock wool or cellulose, usually costs less than batts and covers better. Prices still vary, so it's fair to compare both before you choose. If you're leaning toward cellulose, a fiberglass industry group says cellulose makers agree it settles over time, most putting it at about 20%, so ask how the job allows for that.
Should air sealing come before insulation?
Yes, and ENERGY STAR's attic air sealing guide puts the sealing first and the insulation after it. The gaps are much harder to reach once new insulation covers them, so it makes sense to plan both as one job.
How do I know if my attic needs repairs before new insulation?
Wet or damp insulation, moldy or rotted rafters, and little or no attic ventilation all need fixing first, and that same guidance says to have a professional correct them before going ahead. New insulation over a wet or unvented attic just traps the problem. If you have a gas furnace or water heater that vents on its own draft, it gets a combustion safety test, a check that exhaust isn't spilling back into the house, and anything it turns up is fixed before the attic work.
What happens if my older Fort Worth house has knob and tube wiring or vermiculite?
Both stop the insulation work until they're handled. Under a federal attic checklist, active knob and tube wiring has to be replaced or properly boxed before attic insulation goes in, so the wiring becomes the first step of the project. Vermiculite, a pebbly gray-brown fill found in some older attics, may contain asbestos, and it has to be dealt with before the job goes ahead.
How long does home insulation take, and do we have to leave the house?
Time in your attic turns mostly on how much prep comes first and what we're installing, and I'll walk you through the timing once I've seen it. With loose fill, most families stay home while we work. With spray foam, everyone, kids and pets included, stays out until the foam maker's re-entry time, the point the maker says it's safe to come back inside.
Related insulation work
Insulation removal
When old insulation is soaked, moldy or full of rodent droppings, pulling it out gives the new layer a clean, dry attic to do its work in.
Crawl space insulation
Cold floors and drafts that rise from under the house usually trace back to the crawl space, and insulating down there makes the rooms above it more comfortable.